Jungle King
Tractor Driven rotary mower for shrub cutting
Technical
- Frame: Strong Steel Frame "Fabricated"
- Transmission: From Tractors rear shaft to propeller shaft fitted with gear box
- Cutting Blade: Specially strengthened, lipped cutting edge for long life
- Cutting Ratio: 4.5 acre per Hour
- Opertaion: By Tractor only
- Paint: Liquid Painted
- Height Adjustment: 1/2" - 4 1/2"
- Cutting Height: 1/2" - 24"
Gang Mowers
Technical
- Frame: The ganging frames have a common unit frame. The Framework is so designed that there are no upward projections, thus enabling the mowers to run under low hanging trees etc. and cut grass will not adhere to choke the mowers
- Chassis: Unbreakable, Rainforced steel, Firnly braced by axle and bottom block assembly
- Transmission: The cyclinder is driven at both ends from road wheels through hardened steel machined cut gear, totally enclosed in OIL BATH and ratched drive to facilitate turning. Clutches fitted enables the cyclinder to be taken out of gear and helps in transportation.
- Gear Drive Type: All gears are fitted with bearing for longer life
- Cutting Cyclinder: Blades running on heavy duty ball bearings
- Cutting Ratio: At 08Kph 3.0 Acres per hour / 3 unit
At 10Kph 4.2 Acres per hour / 3 unit
At 16Kph 6.0 Acres per hour / 3 unit - Cutting Width: 3 unit - 2,10m (7fh 0in)
- Overall Width: 3 unit - 2.59m (8fth 6in)
- Overall Length: 3 unit - 2.59m {8ft 6in}
- Clutch A Clutch is fitted to each gearbox to engage the drive to the cutting cyclinder
- Carriages Unbreakable
- Adjustment Cutting height can be adjusted from 1/2 to 8inches
- Rear Roll Running on bearings on both sides
- Tyres (MEGNA) Special non skid rubber tyres, fitted with Double ball Bearings
- Paint Powder coated / Liquid Painted